SecurityTracker.com
    Home    |    View Topics    |    Search    |    Contact Us    |   

SecurityTracker
Archives


 


Category:   Device (Printer)  >   JetDirect Vendors:   HPE
(HP Issues Workaround for JetDirect Firmware) Many Simple Network Management Protocol (SNMP) Implementations Allow Remote Users to Deny Service or Obtain Access to the System
SecurityTracker Alert ID:  1003673
SecurityTracker URL:  http://securitytracker.com/id/1003673
CVE Reference:   CVE-2002-0012, CVE-2002-0013   (Links to External Site)
Date:  Feb 26 2002
Impact:   Denial of service via network, Execution of arbitrary code via network, Root access via network, User access via network
Fix Available:  Yes  Vendor Confirmed:  Yes  
Version(s): X.08.32 and lower, where X = A through K
Description:   CERT reported that the University of Oulu (Finland) has discovered vulnerabilities in many vendor implementations of the Simple Network Management Protocol (SNMP) version 1.

The Oulu University Secure Programming Group (OUSPG, http://www.ee.oulu.fi/research/ouspg/) reports that there are numerous vulnerabilities in SNMPv1 implementations from many different vendors. A remote user can reportedly cause denial of service attacks or gain elevated privileges on the system. The extent of the vulnerabilities depends on the specific vendor implementation.

Impact:   A remote user may be able to cause denial of service conditions or may be able to obtain elevated privileges on the system.
Solution:   HP reports that the following version are *not* vulnerable:

X.21.00 and higher, where X = L through P.

For customers with vulnerable versions (X.08.32 and lower, where X = A through K), HP has released the following workaround for the HP JetDirect firmware and is working on a firmware fix:

Change the set-community-name and use theAccess Control List as described in "HP Jetdirect Print Servers - Making HP Jetdirect Print Servers Secure on the Network":

http://www.hp.com/cposupport/networking/support_doc/bpj05999.html#P88_10129

To limit the vulnerability, HP has the following recommendations:

SNMPv1 security relies on the set community name. It is important that a set-community-name be configured on the Jetdirect device and that it be kept secret.

Jetdirect Print Servers offer an Access Control List that can be used to specify which hosts can make SNMP configuration changes to Jetdirect Print Servers.

The steps above can help prevent exploitation of the vulnerability. To eliminate the vulnerability before a fix is available SNMP can be disabled on the Jetdirect device.

To disable SNMP on a JetDirect print server, HP has provided the following directions:

1. Update the firmware to the highest level as described in the Jetdirect Upgrade Instructions document:

http://www.hp.com/cposupport/networking/support_doc/bpj06917.html

NOTE: Disabling SNMP may affect device discovery and port monitors that use SNMP to get status on the device. Use this feature with care.

2. Telnet to the Jetdirect device (on the latest firmware) and type:

snmp-config: 0
quit

This will completely disable SNMP on the Jetdirect device.

HP always recommends upgrading Jetdirect firmware for the latest bug fixes and security benefits. The upgrade firmware and download utility are available free of charge:

http://www.hp.com/cposupport/networking/support_doc/bpj06917.html

The following is a list of JetDirect Product Numbers that can be freely upgraded to X.08.32 or X.21.00 or higher firmware. The latest firmware revision available for download is given. For example, the latest firmware revision for the J3110A is G.08.32.

EIO (Peripherals Laserjet 4000, 5000, 8000, etc...)
J3110A 10T, [G.08.32]
J3111A 10T/10B2/LocalTalk, [G.08.32]
J3112A Token Ring (discontinued), [G.08.32]
J3113A 10/100 (discontinued), [G.08.32]
J4169A 10/100, [L.21.22]
J4167A Token Ring, [L.21.25]
J6057A 10/100, [R.22.09]

MIO (Peripherals LaserJet 4, 4si, 5si, etc...)
J2550A/B 10T (discontinued), [A.08.32]
J2552A/B 10T/10Base2/LocalTalk (discontinued), [A.08.32]
J2555A/B Token Ring (discontinued) [A.08.32]
J4100A 10/100, [K.08.32]
J4105A Token Ring, [K.08.32]
J4106A 10T, [K.08.32]

LIO (Peripherals Color Inkjet cp1160, cp1700)
J6042A 250m 10/100, [N.21.22]

External Print Servers
J2591A EX+ (discontinued), [E.08.32]
J2593A EX+3 10T/10B2 (discontinued), [D.08.32]
J2594A EX+3 Token Ring (discontinued), [D.08.32]
J3263A 300X 10/100, [H.08.32]
J3264A 500X Token Ring, [J.08.32]
J3265A 500X 10/100, [J.08.32]
J6038A 310x USB 10/100, [Q.22.04]

Cause:   Access control error, Boundary error, Input validation error

Message History:   This archive entry is a follow-up to the message listed below.
Feb 12 2002 Many Simple Network Management Protocol (SNMP) Implementations Allow Remote Users to Deny Service or Obtain Access to the System



 Source Message Contents

Subject:  HP-UX security bulletins digest



Document ID:  HPSBUX0202-184
Date Loaded:  20020212
      Title:  Sec. Vulnerability in SNMP (rev. 3)

TEXT

			

				


 -----------------------------------------------------------------
 **REVISED 03**  HEWLETT-PACKARD COMPANY SECURITY BULLETIN: #0184,
   Originally issued: 12 Feb. 2002
   Last revised:  24 Feb. 2002
 -----------------------------------------------------------------

The information in the following Security Bulletin should be acted
upon as soon as possible.  Hewlett-Packard Company will not be
liable for any consequences to any customer resulting from customer's
failure to fully implement instructions in this Security Bulletin as
soon as possible.

 ------------------------------------------------------------------
PROBLEM:  Vulnerabilities in SNMP request and trap handling.

PLATFORM: HP 9000 Series 700 and Series 800 running HP-UX
          releases 10.X and 11.X
          HP Procurve switches
**REVISED 03**
---->>    JetDirect Firmware
          MC/ServiceGuard, EMS HA Monitors

DAMAGE:   Possible denial-of-service, service interruptions,
          unauthorized access.

SOLUTION: Apply patches or implement workarounds.  See below.
         For HP-UX releases:
        PHSS_26137    s700_800  HP-UX 10.20 OV EMANATE14.2 Agent
        PHSS_26138    s700_800  HP-UX 11.X  OV EMANATE14.2 Agent
        PSOV_03087    Solaris 2.X      EMANATE Release 14.2
         For systems running OV NNM:
        PHSS_26286    s700_800  HP-UX  10.20  ovtrapd large trap fix
        PHSS_26287    s700_800  HP-UX  11.X   ovtrapd large trap fix
        PSOV_03100    Solaris 2.X             ovtrapd large trap fix
        NNM_00857     NT 4.X/Windows 2000     ovtrapd large trap fix

MANUAL ACTIONS: Upgrade or workaround action per below.

AVAILABILITY:  Patches for some affected systems are available now.
CHANGE SUMMARY: Rev.01 affected HP Procurve scope expanded, 
                       plus Procurve patch availability added.
                       NNM ovtrapd patch availability added.
                Rev.02 SG and EMS found not vulnerable.
                Rev.03 Jetdirect vulnerability updated
 ------------------------------------------------------------------

 A. Background
    CERT has issued an advisory:
    CERT Advisory CA-2002-03 Multiple Vulnerabilities in Many
    Implementations of the Simple Network Management Protocol
    (SNMPv1) containing information about the vulnerabilities.
    
    Hewlett-Packard Company will revise this bulletin as new
    information becomes available.

    ---------------------------------------------------------
    hp Procurve switches
    ---------------------------------------------------------

    We are still in the process of determining which other HP
    Procurve products are subject to these vulnerabilities.
    We have created fixes for products below which will resolve
    these issues.  See Section C below.

    Customers can download these patches in the form of software
    upgrades at:
              http://www.hp.com/rnd/software/switches.htm

                   Product                      Fix revision number
       ----------------------------------       --------------------
       HP Procurve Switch 2524   (J4813A)        F.04.08 or greater
       HP Procurve Switch 2512   (J4812A)        F.04.08 or greater
       HP Procurve Switch 4108GL (J4865A)        G.04.05 or greater
       HP Procurve Switch 4108GL-bundle (J4861A) G.04.05 or greater

    Not all HP Procurve products have completed testing, nor are
    they listed here, and may or may not have these vulnerabilities.
    This bulletin will again be updated as new information becomes
    available.

    ---------------------------------------------------------
    NNM  (Network Node Manager)
    ---------------------------------------------------------

    Some problems found in NNM product were related to trap
    handling.  Patches are available.  See Section C below.

**REVISED 03**
    ---------------------------------------------------------
--->> JetDirect Firmware
    ---------------------------------------------------------

    JetDirect Firmware Version      State
    ==========================      =====
--->>   X.08.32 and lower           VULNERABLE
--->>   (where X = A through K)
--->>   X.21.00 and higher          NOT vulnerable
--->>   (where X = L through P)

     ----------------------------------------------------------
     HP-UX Systems running snmpd or OPENVIEW
     ----------------------------------------------------------
     Any HP-UX 10.X or 11.X system running snmpd or snmpdm is
     vulnerable.  To determine if your HP-UX system has snmpd
     or snmpdm installed:

       swlist -l file | grep snmpd

B. Fixing the problem
   Install the appropriate patch or firmware revision or work
   around problem as detailed below.

C. Recommended solution
    ---------------------------------------------------------
    hp Procurve switches
    ---------------------------------------------------------

    Customers can download these patches in the form of software
    upgrades at:
              http://www.hp.com/rnd/software/switches.htm

             Product                        Fix revision number
    -----------------------------------     -------------------
    HP Procurve Switch 2524    (J4813A)       F.04.08 or greater
    HP Procurve Switch 2512    (J4812A)       F.04.08 or greater
    HP Procurve Switch 4108GL  (J4865A)       G.04.05 or greater
    HP Procurve Switch 4108GL-bundle (J4861A) G.04.05 or greater

    ---------------------------------------------------------
    NNM  (Network Node Manager)
    ---------------------------------------------------------

     Problems found in the NNM product (related only to trap
     handling) are addressed in patches available at:

 http://support.openview.hp.com/cpe/patches/nnm/6.2/s700_800_11.X.jsp

     PHSS_26286    s700_800  HP-UX  10.20  ovtrapd large trap fix
     PHSS_26287    s700_800  HP-UX  11.X   ovtrapd large trap fix
     PSOV_03100    Solaris 2.X             ovtrapd large trap fix
     NNM_00857     NT 4.X/Windows 2000     ovtrapd large trap fix

    ---------------------------------------------------------
    MC/ServiceGuard
    ---------------------------------------------------------
    MC/ServiceGuard is not affected.  Testing has been completed
    and neither MC/ServiceGuard nor ServiceGuard OPS Edition are
    negatively impacted.

    The ServiceGuard Manager product does not use the cluster
    SNMP and remains unaffected.

    ---------------------------------------------------------
    Event Monitoring System  (EMS)
    ---------------------------------------------------------
    Testing of the MC/ServiceGuard or ServiceGuard OPS Edition
    application with package resources defined using EMS High
    Availability Monitors has been completed and shows no
    vulnerability to this issue.

**REVISED 03**
    ---------------------------------------------------------
--->> JetDirect Firmware
    ---------------------------------------------------------

    JetDirect Firmware Version      State
    ==========================      =====
--->>   X.08.32 and lower           VULNERABLE
--->>   (where X = A through K)
--->>   X.21.00 and higher          NOT vulnerable
--->>   (where X = L through P)

--->>FIX STATUS: HP is working on a firmware fix.

--->>WORKAROUND: Change the set-community-name and use the
--->>Access Control List as described in "HP Jetdirect Print
--->>Servers - Making HP Jetdirect Print Servers Secure on
--->>the Network":

--->>  http://www.hp.com/cposupport/networking/support_doc/
--->>  bpj05999.html#P88_10129

--->>      LIMITING THE VULNERABILITY

--->>SNMPv1 security relies on the set community name. It is
--->>important that a set-community-name be configured on the
--->>Jetdirect device and that it be kept secret.

--->>Jetdirect Print Servers offer an Access Control List that
--->>can be used to specify which hosts can make SNMP
--->>configuration changes to Jetdirect Print Servers.

--->>The steps above can help prevent exploitation of the
--->>vulnerability.  To eliminate the vulnerability before a fix
--->>is available SNMP can be disabled on the Jetdirect device.

--->>      DISABLING SNMP ON A JETDIRECT PRINT SERVER

--->>1. Update the firmware to the highest level as described in
--->>    the Jetdirect Upgrade Instructions document:

--->> http://www.hp.com/cposupport/networking/support_doc/bpj06917.html

--->>NOTE:    Disabling SNMP may affect device discovery and port
--->>         monitors that use SNMP to get status on the device.
--->>         Use this feature with care.

--->>2.  Telnet to the Jetdirect device (on the latest firmware)
--->>     and type:
--->>                   snmp-config: 0
--->>                   quit

--->>This will completely disable SNMP on the Jetdirect device.


--->>HP always recommends upgrading Jetdirect firmware for the
--->>latest bug fixes and security benefits.  The upgrade firmware
--->>and download utility are available free of charge:

--->>http://www.hp.com/cposupport/networking/support_doc/bpj06917.html

--->>The following is a list of JetDirect Product Numbers
--->>that can be freely upgraded to X.08.32 or X.21.00 or
--->>higher firmware.  The latest firmware revision available
--->>for download is given.  For example, the latest firmware
--->>revision for the J3110A is G.08.32.

--->>EIO (Peripherals Laserjet 4000, 5000, 8000, etc...)
--->>        J3110A 10T                              [G.08.32]
--->>        J3111A 10T/10B2/LocalTalk               [G.08.32]
--->>        J3112A Token Ring (discontinued)        [G.08.32]
--->>        J3113A 10/100 (discontinued)            [G.08.32]
--->>        J4169A 10/100                           [L.21.22]
--->>        J4167A Token Ring                       [L.21.25]
--->>        J6057A 10/100                           [R.22.09]

--->>MIO (Peripherals LaserJet 4, 4si, 5si, etc...)
--->>        J2550A/B 10T (discontinued) [A.08.32]
--->>        J2552A/B 10T/10Base2/LocalTalk (discontinued) [A.08.32]
--->>        J2555A/B Token Ring (discontinued) [A.08.32]
--->>        J4100A 10/100                      [K.08.32]
--->>        J4105A Token Ring                  [K.08.32]
--->>        J4106A 10T                         [K.08.32]

--->>LIO (Peripherals Color Inkjet cp1160, cp1700)
--->>        J6042A 250m 10/100                    [N.21.22]

--->>External Print Servers
--->>        J2591A EX+ (discontinued)               [E.08.32]
--->>        J2593A EX+3 10T/10B2 (discontinued)     [D.08.32]
--->>        J2594A EX+3 Token Ring (discontinued)   [D.08.32]
--->>        J3263A 300X 10/100                      [H.08.32]
--->>        J3264A 500X Token Ring                  [J.08.32]
--->>        J3265A 500X 10/100                      [J.08.32]
--->>        J6038A 310x USB 10/100                  [Q.22.04]

    ----------------------------------------------------------
    HP-UX Systems running snmpd or OPENVIEW
    ----------------------------------------------------------
    The following patches are available now:

     PHSS_26137    s700_800  HP-UX 10.20 OV EMANATE14.2 Agent$
     PHSS_26138    s700_800  HP-UX 11.X  OV EMANATE14.2 Agent$
     PSOV_03087    Solaris 2.X      EMANATE Release 14.2 $

    All three patches are available from:

     http://support.openview.hp.com/cpe/patches/

     In addition PHSS_26137 and PHSS_26138 are now available 
     from:
           http://itrc.hp.com

  ============================================================
   NOTE: The patches are labeled OV (Open View).  However, the
   patches are also applicable to systems that are _NOT_
   running Open View.
  ============================================================

    Workaround for HP-UX Systems:

    If a patch is not available for your platform or you cannot
    install an available patch, snmpd and snmpdm can be disabled
    by removing their entries from /etc/services and removing the
    execute permissions from /usr/sbin/snmpd and /usr/sbin/snmpdm.

 D. To subscribe to automatically receive future NEW HP Security
    Bulletins from the HP IT Resource Center via electronic
    mail, do the following:

    Use your browser to get to the HP IT Resource Center page
    at:

       http://itrc.hp.com

    Use the 'Login' tab at the left side of the screen to login
    using your ID and password.  Use your existing login or the
    "Register" button at the left to create a login, in order to
    gain access to many areas of the ITRC.  Remember to save the
    User ID assigned to you, and your password.

    In the left most frame select "Maintenance and Support".

    Under the "Notifications" section (near the bottom of
    the page), select "Support Information Digests".

    To -subscribe- to future HP Security Bulletins or other
    Technical Digests, click the check box (in the left column)
    for the appropriate digest and then click the "Update
    Subscriptions" button at the bottom of the page.

    or

    To -review- bulletins already released, select the link
    (in the middle column) for the appropriate digest.

    To -gain access- to the Security Patch Matrix, select
    the link for "The Security Bulletins Archive".  (near the
    bottom of the page)  Once in the archive the third link is
    to the current Security Patch Matrix. Updated daily, this
    matrix categorizes security patches by platform/OS release,
    and by bulletin topic.  Security Patch Check completely
    automates the process of reviewing the patch matrix for
    11.XX systems.

    For information on the Security Patch Check tool, see:
    http://www.software.hp.com/cgi-bin/swdepot_parser.cgi/cgi/
    displayProductInfo.pl?productNumber=B6834AA"

    The security patch matrix is also available via anonymous
    ftp:

    ftp.itrc.hp.com:~ftp/export/patches/hp-ux_patch_matrix

    On the "Support Information Digest Main" page:
    click on the "HP Security Bulletin Archive".


 E. To report new security vulnerabilities, send email to

    security-alert@hp.com

    Please encrypt any exploit information using the
    security-alert PGP key, available from your local key
    server, or by sending a message with a -subject- (not body)
    of 'get key' (no quotes) to security-alert@hp.com.

    Permission is granted for copying and circulating this
    Bulletin to Hewlett-Packard (HP) customers (or the Internet
    community) for the purpose of alerting them to problems,
    if and only if, the Bulletin is not edited or changed in
    any way, is attributed to HP, and provided such reproduction
    and/or distribution is performed for non-commercial purposes.

    Any other use of this information is prohibited. HP is not
    liable for any misuse of this information by any third party.
 ________________________________________________________________
--
-----End of Document ID:  HPSBUX0202-184--------------------------------------

 
 


Go to the Top of This SecurityTracker Archive Page





Home   |    View Topics   |    Search   |    Contact Us

This web site uses cookies for web analytics. Learn More

Copyright 2022, SecurityGlobal.net LLC